Exterior Grade Waterproofing Membrane
NXT AquaGuard is an exterior grade, 100% waterproofing membrane design for application on external surface to protect against water ingress and weathering. Based on a hybrid technology, NXT AquaGuard can be used on vertical and horizontal surfaces as a high strength weatherproof protective membrane with high build elastomeric functionality for general roofing substrates. NXT AquaGuard provides and excellent flexible protective coating to roofs with good anti-carbonation properties, breathability and resistance to varying climatic conditions.
Nutech’s proprietary resin technology provides a hard yet flexible surface with nano-technology for added water breading and contamination resistance for the life of the coating. Unlike conventional elastomeric roof coatings, Nutech’s NXT AquaGuard will stay cleaner for longer and remain 100% waterproof under seasonal ponding water conditions.
Application and Features
NXT AquaGuard requires two coats to ensure that the surface is 100% waterproof. Before application, the surface must be cleaned and dried, and joins should be re-enforced using Poly Fabric. The entire surface should then be primed with a suitable primer.
Two coats of NXT AquaGard should be applied using a brush, roller or airless spray unit with a 20-30 thou tip. Allow 4 hours drying time between coats, and up to 72 hours for a weatherproof finish.
NXT AquaGuard is not designed for use as an exposed membrane under vehicular or heavy foot traffic. For roof applications NXT AquaGuard is to be applied to surfaces with appropriate falls and drainage. NXT AquaGuard is not designed to be immersed or applied to subterranean areas. Product in a wet state will clean up with water. Once the product has dried it will need mechanical means or solvents to remove.
High guild, elastomeric and flexible
Resistant to fungi and algae growth
Resistant to salt and carbon dioxide attack
Supplied to order with no minimum quantity
Resists light foot traffic
Easy clean up with water
Long shelf life, unused product remains viable
Coloured viscous liquid
Film Forming Temperature
Dry Film Thickness
2 coats @ 2.5m2 per litre
The information given in this data sheet is based on many years experience and is correct to the best of our knowledge. However as the use of our product is beyond our control we can only be responsible for the quality of our product at the time of dispatch. For additional information about specifications or application please contact our company. As this information is of a general nature we cannot assume responsibility for individual use.