MaxiPoint
Maxi Point is a ready-to-use, permanently flexible roof pointing mortar designed to resist cracking, fading, and roof movement.
MaxiPoint
Maxi Point is a ready-to-use, permanently flexible roof pointing mortar designed to resist cracking, fading, and roof movement.
-
Water Based
-
Water Clean-up
Permanent Flexibility for Long-Lasting Roof Performance
Maxi Point is a high-performance, ready-to-use roof pointing mortar that delivers permanent flexibility and long-term durability. Its thick, workable consistency allows easy application while forming a strong, weather-resistant seal on roof ridges and hips.
Flexible Acrylic Formulation
Maxi Point uses a pure-grade, internally flexible acrylic resin. As a result, it remains flexible across a wide range of temperatures and weather conditions. This flexibility allows the mortar to move with the roof, helping prevent cracking, lifting, or separation over time.
Smooth Application and Clean Finish
In addition, Maxi Point applies smoothly and finishes cleanly. Specially graded fillers improve trowel slip and allow precise shaping without sticky thickeners. As a result, applicators achieve faster, cleaner, and more consistent results on both new roofs and restoration projects.
Fast Drying Performance
Maxi Point features a high-resin-solids formula. Therefore, it requires less water loss during curing and dries faster than many competing products. However, in very cold or damp conditions, drying time can be accelerated by adding 375 mL of builders’ cement per 10 litres of Maxi Point. Stir thoroughly before use. Once cement is added, the product will set quickly and cannot be stored or reused. Do not add water after adding cement.
Fade Resistance and Colour Stability
Furthermore, Maxi Point resists fading and weather damage. High-quality pigments and pure acrylic resin protect against UV exposure and moisture. As a result, the product maintains colour and durability over time. Maxi Point is available in a range of colours to suit both new and renovated roofs.
Compatible with Roof Coating Systems
After curing, Maxi Point can be painted with compatible NuTech Paint water-based polymer coatings. These include NuPrime, GP Primer, Master Sealer, Membrane, NuFlex, TileFlex 2000, Asbestos Primer, Insulguard, and DecraTex.
Compliance and Guarantee
Finally, Maxi Point complies with AS 2050-1995 Roof Fixing requirements and is classified C3 for wind. It is guaranteed to resist normal roof movement for 10 years without cracking or breaking away.
- Shingles
- Asphalt Tiles
- Concrete Roof Tiles
- Terracotta Roof Tiles
Paintable
Maxi Point can be easily painted with any Nutech water-based polymer coating including Nu-Prime, GP Primer, Master Sealer, Membrane, Nu-Flex, TileFlex 2000, Asbestos Primer, Insulguard and DecraTex. Surfaces coated with Perm-Point can be re-coated with Maxi Point.
Guaranteed
Maxi Point is guaranteed to resist normal occurring roof movements for 10 years without cracking or breaking away.
Meets Australian Standards
Maxi Point complies with the provisions of the Australian Standard AS 2050-1995 Roof Fixing and accredited with a C3 wind classification.
| Appearance: | Coloured stiff mortar mix |
|---|---|
| Solubility: | Water |
| Film Forming Temperature: | 5°C |
| Dry Film Thickness: | 3 – 5mm minimum |
| Touch Dry: | 30 minutes (at 20°C) |
| Coverage Rate: | 25 – 27 lm/10L m2/L |
Application Notes
-
Apply only to sound, clean, and well-prepared surfaces
-
Remove loose or cracked bedding mortar before application
-
Ensure surfaces are dry and free from dust, moss, and debris
Application by trowel of a thin film between 3mm and 5mm thick is recommended using a similar technique to conventional pointing mixes. Sponge finishing is not recommended.
New Tile Roofs
Bedding cement should be finished plumb and free of holes and voids. Fresh bedding does not require cull curing before application of Maxi Point. However, it should be dry enough to resist trowel pressure.
Old Tile Roofs
Crumbly cracked and loose unstable bedding and pointing should be replaced. Where pointing over sound old bedding and pointing, the surface must be clean and free of dirt, moss, lichen and other contamination. Maxi Point cannot be expected to adhere to unless the substrate is sound and clean. All existing collars should be removed and the roof re-pointed with new collars.
Storing
Properly re-seal the pail before storing to preserve shelf life. The product must be stored indoors and out of direct sunlight. Prevent product freezing. Storage temperatures should be between 3°C and 45°C.
MaxiPoint
Related Products
TileFlex
TileFlex is an innovative, nanotechnology-modified acrylic polymer coating designed to substantially lower surface friction to…
View products