Bullyliner
BULLYLINER™ is an eco-friendly, water-based rubberised coating made from recycled tyres. Tough, VOC-free, and easy to apply, it delivers long-lasting protection for automotive, marine, industrial, and agricultural surfaces.
Bullyliner
BULLYLINER™ is an eco-friendly, water-based rubberised coating made from recycled tyres. Tough, VOC-free, and easy to apply, it delivers long-lasting protection for automotive, marine, industrial, and agricultural surfaces.
-
Car
-
Colored
-
Durable
-
EcoFriendly
-
High Build
-
Low Odour
-
Low VOC
-
Non-flammable
-
Old Surfaces
-
Water Based
-
Water Clean-up
-
Waterproof
BULLYLINER™ is a zero VOC rubberized coating designed to protect demanding surfaces in automotive, marine, industrial, and commercial environments. This water-based protective coating uses recycled rubber and advanced nanotechnology to deliver long-lasting performance without harsh fumes.
As a zero VOC rubberized coating, BULLYLINER™ applies easily as a single-component system. Users can roll, brush, or spray it onto properly prepared surfaces. Once cured, it forms a flexible, non-slip protective layer that resists abrasion, impact, moisture, and weather exposure.
Flexible Rubberized Coating That Bonds to Multiple Surfaces
This rubberized protective coating bonds strongly to prepared metal, concrete, wood, and fiberglass. Because the coating remains flexible, it moves with the surface instead of cracking or peeling. As a result, it performs well in areas exposed to vibration, temperature changes, and repeated use.
Professionals rely on BULLYLINER™ for consistent results, while DIY users appreciate the simple application and forgiving recoat window. Users can clean the surface with mild soap and water and touch up or recoat at any time.
Sustainable, Low-Emission Protective Coating
BULLYLINER™ uses recycled rubber from tires, helping reduce landfill waste. In addition, its zero VOC formulation supports safer application in garages, workshops, and marine areas. This makes it a practical choice for projects where air quality and safety matter.
Offered by Bullyliner, this coating delivers industrial-grade protection while supporting more sustainable coating practices.
Suitable Uses for This Zero VOC Rubberized Coating
-
Truck beds, wheel wells, and underbodies
-
Off-road and 4×4 accessories
-
Trailers and utility trailers
-
Marine decks, ramps, and boat trailers
-
Agricultural and industrial equipment
-
Prepared concrete, metal, wood, and fiberglass
Helpful links:
U.S. Environmental Protection Agency (EPA) – VOCs
U.S. EPA – Sustainable Materials Management
Guides:
- Fibreglass
- Plastic
- Wood
- Concrete: Flooring and walkways.
- Metals: Including mild steel, galvanized steel, and aluminum.
-
Zero-VOC, water-based rubberized coating
-
Made with recycled rubber for added sustainability
-
Strong adhesion to multiple prepared surfaces
-
Flexible coating resists cracking and peeling
-
Non-slip finish improves safety
-
Resists abrasion, impact, moisture, and weather
-
Easy roll, brush, or spray application
-
Simple cleaning, touch-ups, and recoating
| Packaging: | 1L Can, Box of 4x 1L Cans, 5L, 10L |
|---|---|
| Type: | Water-based, nanotechnology-modified resin rubberised coating |
| Finish: | Textured, semi-matte protective layer |
| Coverage: | Approx. 10-12 m2/L (depending on surface) |
| Dry Time: | Touch dry in 1-2 hours; full cure in 72 hours |
| Recoat Time: | 2 Hours |
| Colours: | Available in 8 standard colours |
| Clean Up: | Water-based, simple clean-up with water |
|
Application |
Brush: Soft-bristle brush Roller: 5 – 10mm nap microfibre sleeve Spray: BULLYLINER™ Under Body Spray Gun (recommended), observing the recommended air pressure |
|
Test Patch: |
Where applicable, conduct a small test patch in an inconspicuous area to ensure adequate product performance. |
- Ensure surface is clean, dry, and free from oil, grease, and loose materials.
- Lightly abrade smooth surfaces for maximum adhesion
- Stir well before use (no hardeners or pre-mixing required)
- Apply using brush, roller, or spray equipment
- Allow sufficient drying time between coats (as recommended)
- Clean tools and equipment immediately with water
-
Wash regularly with mild detergent and water to remove dirt or chemicals
-
Avoid harsh solvents and abrasive cleaners that may degrade the finish
-
Recoat worn or damaged areas as needed for continued protection
-
Store any remaining product sealed and away from extreme temperatures
|
Our goods come with guarantees that cannot be excluded under Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. |
New life for 2007 Chevy
I am so impressed with this product, instead of using this as a bed liner I sprayed my entire truck with the liner. I live in Ohio USA where we always have a ton of salt on the rodes during the winter months. I sprayed this coating 2 years ago and have not seen one rust spot come back up on my truck. And very easy to use and clean up.
Finish
Hi , I thinnned this stuff out 4:1 ratio and sprayed it with a primer gun with a 2.4 mm tip. Came out perfectly with a fine finish, which I was after. Leave 20 mins between coats , touch dry. Spray wet coats.
Nice stuff.
Used this on my pick- up bed. My jeep Comanche had a clean bed but rust signs showing. I used this product to create a whole new bed and to protect it from further rusting.
High quality coating
I got this bedliner coating and the spraygun applicator for my boyfriend as he recently got a “new” truck. It’s a 2008 and it needed some love and care. We used this for the bedliner and the black color makes it look better than the original color! The spraygun made for easy application. My only complaint would be that you’ll need more than one can to do the entire liner.
Bullyliner
Related Products
No related products found.