Flat Roof Coatings

Nutech Flat Roof Restoration System.

NXTsiliconetag2

 

Nutech NXT Silicone is a ready-to use, high solids, single component, moisture cure field applied silicone Roof coating. NXT Silicone is a breathable membrane possessing superior weathering and water resistance characteristics.

Coverage Rate: Standard 10 year warrantee
Nutech NXT silicone is applied as a minimum one coat application system at coverage rate 362 SQFT per 5gallon
Nutech NXT Silicone can be applied as a two coat application system with coverage rate 181 SQFT per coat over the two coat application (For best performance results and Nutech warrantee to stand, Nutech highly recommends the  use of re enforcing Poly Fabric on all roof joints, penetrations and surface overlaps as part of a priming system before Nutech Silicone is applied.)  (see Nutech standard 10 year warrantee terms and conditions)

Product Coverage Rate: Standard 20 year warrantee

Nutech NXT silicone is applied as a minimum two coat application system at coverage rate 362 SQFT per 5gallon per coat over the two coat application. (For best performance results and Nutech warrantee to stand, Nutech highly recommends the  use of re enforcing Poly Fabric on all roof joints, penetrations and surface overlaps as part of a priming system before Nutech Silicone is applied.)
(See Nutech standard 20 year warrantee terms and conditions)

Nutech Paint spends many years developing specific coating systems for individual roofing surfaces to ensure products are not simply re-branded and put into the market place. Nutech NXT Silicone contains the latest Hybrid Polymer technology for ultimate performance on troublesome flat roofs that must withstand ponding water from time to time. Tested to CRRC NXT silicone will reflect over 87% of the suns heat way from your roofs surface resulting in a more comfortable living and working environment within the building.

Application is simple, all surfaces must be clean, dry, and paintable. It may be necessary to power wash and prime to enhance adhesion. If been applied to Asphalt Nutech Paint recommends one coat of Nutech Asphalt primer be applied to prevent possible Asphalt bleed. All roof joints, penetrations and surface overlaps should be re enforced with Poly Fabric as part of a priming system before Nutech Silicone is applied.

No Thinning or Reducing is necessary, just apply by brush, roller or spray

SYSTEM OPTIONS  NXT Silicone can be used as a topcoat over Nutechs cost affective high build elastomeric base coats product where improved build, traffic and impact resistant characteristics are required. Nutech Paint does not recommend elastomeric coatings been used as a final top coating system.

Nutech strongly: All roof joints, penetrations and surface overlaps be re enforced with Poly Fabric as part of a priming system before Nutech Silicone is applied.

                                                             NXT-silicone-can-sm

 
 
Password Reset
Please enter your e-mail address. You will receive a new password via e-mail.