For powdery roof tiles and concrete
NuPrime Surface Primer is an extremely fine particle size, wet adhesion promoted acrylic primer coat specifically designed for powdery roof tiles and concrete surfaces. Based on a technically advanced formula it is designed to provide deep penetration ensuring top coat adhesion. NuPrime is a non-yellowing clear primer which is fully compatible with all Nutech topcoat systems.
NuPrime is a high quality compound adhesive which bonds with difficult to penetrate powdery surfaces. Used as an undercoat on powdery surfaces, NuPrime provides an excellent surface for topcoatings. Concrete and masonry surfaces undercoated with NuPrime require substantially less topcoat product compared to an unsealed surface.
NuPrime remains one of the only products recommended for the preparation of powdery oxidised surfaces.
Surfaces undercoated with NuPrime and topcoated with either Tileflex, Nuflex or Colourfast perform exceptionally after curing under all weather conditions to provide a 100% waterproof coating.
NuPrime has undergone rigourous testing and special consideration has been given to ensure the chemical composition and compatibility are suitable for all Australian, New Zealand, South-East Asian and UK conditions. NuPrime is a stable non-yellowing coating which retains both flexibility and strength whilst also providing superb protection against bacteria and mould on most surfaces.
Improved drying speed
Guaranteed intercoat adhesion
High resistance to mould and fungus
100% water and weatherproof performance
Easy application by brush, roller or spray unit
Ultraviolet radiation resistant when overcoated
Economical primer coat
Excellent penetration through oxidised powdery tile surfaces
AVOID mist spraying on hot tiles to prevent flash surface drying
Coat in cooler weather conditions or pre-wet the roof with cold water to reduce the surface temperature
Flood apply the coating onto the tile to maximise the penetration through the powdery surface
Milky white viscous liquid
Film Forming Temperature
Dry Film Thickness
Subject to surface conditions
1 Saturation coat @ 4m2 pr litre
The information given in this data sheet is based on many years experience and is correct to the best of our knowledge. However as the use of our product is beyond our control we can only be responsible for the quality of our product at the time of dispatch. For additional information about specifications or application please contact our company. As this information is of a general nature we cannot assume responsibility for individual use.